Molded Teflon Seals
video

Molded Teflon Seals

Molded polytetrafluoroethylene (Teflon®) seals are a type of sealing element made mainly of polytetrafluoroethylene through molding processes. Thanks to the unique physical and chemical properties of PTFE, this type of seal performs exceptionally well under extreme working conditions and is widely used in fields such as chemical engineering, machinery, and aerospace.
Send Inquiry
Product Introduction

Molded polytetrafluoroethylene (Teflon®) seals are a type of sealing element made mainly of polytetrafluoroethylene through molding processes. Thanks to the unique physical and chemical properties of PTFE, this type of seal performs exceptionally well under extreme working conditions and is widely used in fields such as chemical engineering, machinery, and aerospace. Seals are usually made by compression molding process and have the characteristics of high temperature resistance, corrosion resistance and low friction coefficient. Molding is the main process for manufacturing PTFE seals, which typically includes raw material mixing, pre-forming, sintering and cooling. Polytetrafluoroethylene (PTFE) not only has a high melting point but also possesses excellent dielectric properties, making it an ideal choice for wire insulation in aerospace and computer applications. Its frictionless property also makes it a popular choice for hoses and pipes, which helps improve the fluidity of high-viscosity liquids.

product-800-800
product-800-800
product-800-800

 

Product Description

 

PTFE PRECISION MACHINING OF CUSTOM PLASTIC COMPONENTS
● PTFE (Polytetrafluoroethylene)is a performance thermoplastic known for its chemical inertness & resistance to attack, low coefficient of friction, broad operating temperature range, excellent dielectric properties, thermal & electrical insulating, negligible water absorption and non-stick characteristic and among many others


● PTFE resins have an upper service temperature of 500º F (260 C) and is one of the most widely used fluoroplastic material. PTFE mechanical properties are low compared to other advanced engineering plastics, but its properties remain useful over a temperature range of -400° F to 400° F forming its broad operating range suitable for many applications. PTFE can be used as low as - 436º F (-260 C ).


● PTFE properties are often enhanced using a variety of fillers creating a PTFE compound, such as a 15 or 25% glass filled PTFE, to improve wear resistance, increase part stability, and improves creep strength and reduce deformation under load in comparison with virgin grade PTFE. For electrical insulators, the addition of glass filler has little impact on electrical properties.


● PTFE GASKETS come in all shapes and sizes,Gaskets are an integral component of any device which requires the confinement of a gas or liquid. They compensate for the unconformity of mating surfaces. These surface irregularities may be minute or large depending on the purpose of the device but in all cases, the gasket is required to compensate for the difference while limiting the flow of fluid in either direction. Gaskets differ from seals in that gaskets are normally cut from sheets or rolls while seals are formed individually in their own configuration. A flat cut gasket is derived from material of specific thickness and to a configuration that is designed for a specific application.


● Expanded PTFE - EPTFE Gasket material is a soft and conformable material that is ideal for applications with limited bolt load torque available. Or in applications such as glass lined pipe where excessive bolt load will cause more problems than it will solve. If you have never touched this exceptional sealing material think of a dense marshmallow. It has the same chemical resistance and temperature range as any PTFE but it is soft and will effect a seal much quicker than regular PTFE gasket material

 

We manufactures made-to-order high performance, high quality engineered plastic components
● PTFE Ball valve seats, piston rings, seals, lips, cups.
● PTFE bearings, bushings, wear strips
● Diaphragms, insulators, lantern rings, V-rings, gaskets, washers, balls
● Custom PTFE labware including wafer dippers, containers & process vessels
● Low quantity PTFE parts and assemblies for university & commercial research projects.
● Molded PTFE - Basic Shape material: PTFE Rod, Blocks, Plates and Tubes
● A variety of made-to-order OEM industrial components

 

Hot Tags: molded teflon seals, China molded teflon seals manufacturers, suppliers, factory, Bonded Seal Kit, molded gaskets seals, Nitirle Gasket, Molded Teflon Seals, Molded Rubber Seals, Conventional Mechanical Seal

Send Inquiry

Home

Phone

E-mail

Inquiry