Injection molded parts are widely used in modern manufacturing as polymer-based products. Their structural design directly impacts product functionality, production efficiency, and cost control. Reasonable structural design not only ensures the feasibility of injection molding but also improves the product's mechanical properties and appearance.
Injection molded part structural design prioritizes wall thickness uniformity. Uneven wall thickness can lead to inconsistent cooling shrinkage, causing defects such as warping and sink marks. It is generally recommended to maintain wall thickness within the range of 0.5-4mm, and to optimize stress distribution through gradual transitions or ribs. Proper rib placement can significantly enhance part rigidity while avoiding shrinkage caused by localized thickening.
Mold draft angle is a critical parameter in injection molded part structure, directly impacting mold opening efficiency and product integrity. A draft angle of 0.5°-1.5° is recommended for exterior surfaces, while a larger draft angle (typically ≥2°) is recommended for interior surfaces to ensure smooth mold release. Furthermore, rounded corners can effectively reduce stress concentrations. A radius of at least 0.3mm is recommended for corners.
The structural layout of the gate and venting system is also crucial. The dimensions of the main runner, branch runner, and gate must be adjusted according to material flow to avoid underfilling and flash defects. The venting groove depth is generally controlled between 0.02 and 0.05 mm to prevent air entrapment, which can lead to burning or material shortages.
In engineering practice, the structure of injection molded parts must also take assembly requirements into account, such as the pre-embedded design of fasteners, threaded inserts, and other connecting structures. CAE simulation analysis can verify the moldability of the structure in advance, reducing mold trial costs. In short, scientific injection molded part structural design is the key to balancing function, cost, and manufacturing process.



